Introducing the 7330 Repeater Controller

Continuing the 7K legacy...

The new S-COM 7330 Repeater Controller continues the legacy of the 7K Repeater Controller. The all new Main Board uses the latest technology to provide more functionality than the 7K has at lower cost.

Powerful Programming Language

• S-COM Programming Language extended to support new features.
• Fully remotely programmable via DTMF commands and via the RS-232 Serial Port.
• Your work is safe -- retained in non-volatile memory and backed up in flash memory -- ensuring that no information is lost during power outages. Download the controller configuration for editing, storage, or for use in another controller.
• Install firmware updates over the RS-232 Serial Port.
• Upload customer-recorded speech files over the RS-232Serial Port.
• Create a library of user commands or autopatch speed-dial numbers with S-COM's exclusive Macro capability.
• Powerful messaging lets you generate CW, custom and standard single and dual tones, multiple paging formats (single-tone, two-tone, 5/6-tone, and DTMF), and real speech. Messaging is independent by transmitter port.
• Flexible per path programming of Access Mode, Courtesy Beep, Timeout, etc.
• Flexible per transmitter programming of ID, Tail, CTCSS, etc.
• A 100-Setpoint Scheduler executes commands at programmed times and dates.
• Support for the Doug Hall RBI-1 Remote Base Interface lets you build a remote base using Kenwood mobile radios.

Flexible Design

• Energy efficient custom S-COM System-on-a-Chip design.
• The 7330 has three radio ports, each with its own set of dedicated resources. Messages on one port don't block messages on other ports.
  • DTMF Decoder
  • Audio Delay
  • Jumper-configurable receiver input for flat or de-emphasized audio
  • Per-receiver anti-kerchunk
  • Dual-tone audio tone generator with programmable audio level
  • CTCSS generator with reverse burst
  • Real speech player with programmable audio level plays words from a large speech library or from downloaded, customer-recorded speech
  • DB-9 connector per radio port
• Configure each port as a repeater, a full- or half-duplex link, remote base or a control receiver.
• Configure any receiver to any transmitter path for complete flexibility in setup and operation.
• Push-on jumpers configure logic input pullups, COR/CTCSS/PTT invert, Rx deemphasis, Rx/Tx Gain
• Local or remote programming via DTMF or RS-232 serial port.
• Second RS-232 port for controlling auxiliary devices
• Temperature-compensated Real-Time Clock
• Socketed PTT/logic output drivers for easy field repair
• 3-channel A/D input
• Improved locking power connector
• Extended input voltage range, 9-36 volts
• 1U Rack Cabinet and 28-LED Front Panel included
• Legendary S-COM Quality and Reliability
• Much More!

Read More About It

• White Paper: 7330 New Directions (Updated 8/1/2006!)
• White Paper: 7330 Command Changes (2/4/2007)
• Notes from the Workbench
• User Manual and other Documentation

Availability

• Now Available!
• $459 plus $15 for UPS shipping.
• Includes the cabinet, LED front panel, interface connectors, documentation.

© Copyright 2008, S-COM, LLC. All rights reserved.
Last Revised: 11 April 2008. Questions or comments regarding this Web site? Send us your e-mail.
This page has been accessed times since 20 May 2006.